AK Reloading

Tag: reduced recoil

  • 308 Winchester Reduced Recoil Results

    Finally made it out to the range and have some results to report from the load detailed here. This was Barnes once fired brass, CCI 200 primer, and 2.80″ COAL. Here are the results. Even though the velocities were all over the place, I was happy with the .598 MOA group, and with average velocity.…

  • Reduced Recoil Loads for the 7mm PRC

    I saw a post about whether doing reduced recoil loads for a 7mm PRC would be feasible, so I figured I would do a quick write up about my thoughts on it since I have been spending a lot of time working out some hypothetical reduced loads for a few different calibers. Most recently was…

  • 308 Winchester Reduced Recoil Setup

    308 Winchester Reduced Recoil Setup

    Thought I would share a project that I’m going to start working on for a 308 Winchester reduced recoil set up that is good out to about 300 yards. This setup should recoil a bit more than a .243 Winchester, but less than a 30-30 Winchester, both of which are common starter rifles, but both…